How to measure for Pull Out Shelves, Sliding Shelves for kitchen or pantry cabinets.

THE SOLID WOOD
SLIDING SHELF-PULL OUT SHELF
PULL OUT SHELVES
for KITCHEN CABINETS

PULL OUT SHELVES - SLIDING SHELVES - ROLL OUT SHELVES - FROM

THE PREMIUM SLIDING SHELF - PULL OUT SHELF

How to Measure

To determine the correct size of Pull Out Shelves to order, simply open the cabinet door and measure the width of the opening as shown below.

Example:

If W = 17-1/4" you would order to fit a 17" opening.
(Because 17-1/2", the next size, would be too wide.)

The hardware adds 1" to the total width of the operating
Pull Out Shelf, so we would ship a Solid Wood Shelf that
measures 16". Adding the inch for hardware, the overall
size of your Pull Out Shelf and hardware would be 17",
just right for your 17-1/4" kitchen cabinet opening.

Your Sliding Shelf will be 22" front-to-back.

Don't forget to watch out for protruding hinges

European (frameless) cabinetry

The photos at the right show the protruding hinge we are talking about. The door also intrudes into the cabinet opening, even when it is fully opened. Measure from the hinge to the cabinet wall on the other side for the bottom Pull Out Shelf, and from wall to wall for a Pull Out Shelf attached to the existing shelf. Be sure to tell us it's European cabinetry.

euro_HingeProtrudes.jpg (7438 bytes) euro_DoubleDoors.jpg (10735 bytes)

If you're having trouble deciding if a measurement will work, just e-mail us. That's why we're here.

support@ShelfThatGlides.com